Shop Now

Rear Driver Side Brake Caliper - ACDelco (18FR2479)

ACDelco - 18fr2479

ACDelcoMPN18FR2479
Sale Price$73.26
Includes $75.00 refundable Core Charge
Description : ACDelco Gold (Professional) Remanufactured Friction Ready Disc Brake Calipers are the high quality alternative to Original Equipment (OE) parts. They use both aluminum and iron castings. These loaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
disc-brake-caliper;caliper;brake-caliper;disc-brake;

Ships To You

Ready to ship today.

My Location
  • Min. 12 Months
  • Safe, Secure Checkout

Product Details

Description

ACDelco Gold (Professional) Remanufactured Friction Ready Disc Brake Calipers are the high quality alternative to Original Equipment (OE) parts. They use both aluminum and iron castings. These loaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
disc-brake-caliper;caliper;brake-caliper;disc-brake;

Part Number (MPN)
18FR2479
Brand
SKU
18FR2479
UPC / GTIN
707773479773 / 00707773479773
Condition
New
Other Names
19203829
Position
Rear Left
Brand
ACDelco Gold
Bleeder Thread Diameter
M10x1.25
Caliper Color
Natural
Caliper Piston Quantity
1
Caliper Slides Included
Yes
Caliper Type
Integral Parking Brake
Casting Material
Cast Iron
Disc Brake Caliper Casting Material
Cast Iron
FAQ - Answer 1
No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
FAQ - Answer 2
Yes, ACDelco also offers GM OE disc brake calipers.
FAQ - Answer 3
No, but it is a good idea to inspect them at every tire rotation.
FAQ - Question 1
Do I have to replace all my brake parts when replacing my disc brake calipers?
FAQ - Question 2
Does ACDelco offer other grades of disc brake calipers?
FAQ - Question 3
Do I have to replace my disc brake calipers after a certain amount of time?
Features & Benefits - Bullet 1
Pressure tested to ensure safe and confident braking
Features & Benefits - Bullet 2
Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
Features & Benefits - Bullet 3
Developed without attached brake pads for customization
Finish
Plain
Good Maintenance Practices - Section 1 - Bullet 1
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header
The following should be conducted by a qualified technician:
Grade Type
Performance
Height (in)
6.7
Inlet Fitting Type
Female
Length (in)
9.5
Mounting Bolt Thread Pitch (mm)
1.250
Mounting Bracket Included
Yes
Mounting Hardware Included
Yes
Mounting Hole Diameter
10
PADB ID 2223
0.394<br />10
Pad Wear Sensor Included
No
Pads Included
No
Piston 1 Diameter (in)
1.3
Piston 1 Diameter (mm)
33
Piston Quantity
1
Programming Required
No
Signs of Wear & Troubleshooting - Section 1 - Bullet 1
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2
Brake pedal pulsation (not to be confused with normal ABS operation).
Weight (lb)
7
Width (in)
6.7

YearMakeModelBody & TrimEngine & Transmission
Vehicle #1
Year
Make
Model
Body & Trim
Engine & Transmission

BrandEquivalent Part Numbers

Rows per page:

0-0 of 0

BrandEquivalent Part Numbers
GM
19203829

Shipping Policy

  • In stock orders ship within 24 hours.
  • Weekend orders will be processed the next business day.
  • If a part is not in stock and must be ordered from the manufacturer, it usually takes 2-3 days to arrive to us and will be promptly shipped to you. Most of the orders are shipped complete within 2-3 business days. A few of the parts ordered from the manufacturer may take up to 5-6 business days to arrive and will shipped to you immediately.
  • Depending upon location, ground shipments usually take 2-7 days.
  • Your order may be shipped Overnight for an additional cost.
  • Oversized shipments will be additional; you will be contacted prior to shipping for approval.
  • We cannot guarantee transit times for ground and oversize orders.
  • Shipping Carrier substitutions may be made at our determination in an attempt to reduce shipping cost to the customer.
  • We do not ship internationally.
  • In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.
  • We do not ship COD orders.

We use the following shipping parties:

  • UPS
  • USPS

Some products available at modernwholesaledirect.com are shipped directly from the manufacturer or supplier rather than from our own warehouse. This allows us to offer you a wider selection of parts at competitive prices. When an item shows "Drop Ship" the supplier currently has it in stock and it will typically ship within 1–2 business days

Check out our Shipping Policy for more details.

Return Policy

30-Day Return Policy – Modern Wholesale Direct

At Modern Wholesale Direct, we want you to be completely satisfied with your purchase. If for any reason you are not happy with your order, you can return it within 30 days of receiving your item for a refund or exchange, subject to the following conditions:

  1. Eligibility: Returns are accepted on parts that are unused, in original condition, and in the original packaging. Items that have been installed, used, or modified are not eligible for return.

  2. Shipping Costs: The customer is responsible for return shipping costs unless the return is a result of a Parts Direct error (e.g., wrong part sent or defective item). We recommend using a trackable shipping service to ensure your return reaches us safely.

  3. Refunds & Exchanges: Once the return is received and inspected, we will issue a refund to your original payment method or process an exchange if preferred. Refunds typically take 5-7 business days to be processed.

If you have any questions or need assistance with your return, our customer service team is here to help!

Thank you for shopping with Modern Wholesale Direct!

Check out our Return Policy for more details.


Modern Wholesale Direct

Modern Wholesale Direct is your trusted online resource for Aftermarket parts for all your repair and maintenance needs. Shop the full catalog in our online store and keep your vehicle performing its best.