No image available
Rear Brake Drum - ACDelco (18B596)
ACDelco - 18b596
Sale Price$27.74
Description : ACDelco Professional Brake Drums are constructed with G3000 SAE qualified material for structural integrity and maximum service life. They are tested to ISO/TS 16949 quality system standards and validated for balance to provide better braking performance. Chamfer angle, vane configuration, and plate thickness all follow the OE design, making them a premium aftermarket replacement for your GM and non-GM vehicle. Also, no machining is required. ACDelco Professional Brake Drums are ready to be installed right out of the box. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
brake-drum;drum;brakes
brake-drum;drum;brakes
- Return Policy
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Description
ACDelco Professional Brake Drums are constructed with G3000 SAE qualified material for structural integrity and maximum service life. They are tested to ISO/TS 16949 quality system standards and validated for balance to provide better braking performance. Chamfer angle, vane configuration, and plate thickness all follow the OE design, making them a premium aftermarket replacement for your GM and non-GM vehicle. Also, no machining is required. ACDelco Professional Brake Drums are ready to be installed right out of the box. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
brake-drum;drum;brakes
brake-drum;drum;brakes
Part Number (MPN)
18B596
Brand
SKU
18B596
UPC / GTIN
707773896860 / 00707773896860
Condition
New
Other Names
19292978
Position
Rear
Brand
ACDelco Professional
ABS Tone Ring Included
No
Bolt Circle Diameter (in)
3.94
Bolt Circle Diameter (mm)
100
Bolt Hole Quantity
5
Brake Surface Finish
Turned
Center Bore Diameter (in)
2.17in
Center Bore Diameter (mm)
55mm
Depth
1.725<br />43.8
Discard Thickness (in)
7.91
Discard Thickness (mm)
201
FAQ - Answer 1
No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
FAQ - Answer 2
Yes, ACDelco also offers GM OE and Advantage brake drums.
FAQ - Answer 3
No, but it is a good idea to inspect them at every tire rotation.
FAQ - Question 1
Do I have to replace all my brake parts when replacing my brake drums?
FAQ - Question 2
Does ACDelco offer other grades of brake drums?
FAQ - Question 3
Do I have to replace my brake drums after a certain amount of time?
Features & Benefits - Bullet 1
Inspected for balance; resulting in smooth brake operation and noise reduction
Features & Benefits - Bullet 2
Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
Features & Benefits - Bullet 3
Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
Good Maintenance Practices - Section 1 - Bullet 1
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header
The following should be conducted by a qualified technician:
Grade Type
Regular
Height (in)
3.1
Inside Diameter
7.872<br />199.95
Length (in)
7.91
Material
Cast Iron
Maximum Brake Diameter (Discard)
201
Mount Hole Diameter (in)
0.573in
Mount Hole Diameter (mm)
14.554mm
Nominal Drum Diameter
7.9<br />200.7
Outer Cooling Fins
No
Outside Diameter
0.391<br />9.9
Programming Required
No
Signs of Wear & Troubleshooting - Section 1 - Bullet 4
Squealing or scraping noises.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5
Brake pedal pulsation (not to be confused with normal ABS operation).
Stud/Lug Hole Diameter
14.55<br />0.573
Stud/Lug Hole Quantity
5
Weight
10.1
Width (in)
10.6
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Vehicle #1
Year
Make
Model
Body & Trim
Engine & Transmission
| Brand | Equivalent Part Numbers |
|---|---|
BrandEquivalent Part Numbers
GM
19292978
Shipping Policy
We use the following shipping parties:... Check out our Shipping Policy for more details.
Return Policy
30-Day Return Policy – Modern Wholesale Direct... Check out our Return Policy for more details.
Modern Wholesale Direct
Modern Wholesale Direct is your trusted online resource for Aftermarket parts for all your repair and maintenance needs. Shop the full catalog in our online store and keep your vehicle performing its best.