Brake Pressure Modulator Valve Pipe - ACDelco (84974415)
ACDelco - 84974415
Sale Price$18.03
Description : GM Genuine Parts Brake Hydraulic Lines are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are quality reinforced lines that carry fluid within the brake system. The hydraulic fluid must travel to the wheel brakes from the master cylinder. It does this through brake lines or pipes and brake hoses. Brake lines and hoses are designed to withstand high pressures. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Return Policy
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Description
GM Genuine Parts Brake Hydraulic Lines are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are quality reinforced lines that carry fluid within the brake system. The hydraulic fluid must travel to the wheel brakes from the master cylinder. It does this through brake lines or pipes and brake hoses. Brake lines and hoses are designed to withstand high pressures. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Part Number (MPN)
84974415
Brand
SKU
84974415
UPC / GTIN
193468781076 / 00193468781076
Condition
New
Other Names
84974415
Position
Front At ABS Modulator
Brand
GM Genuine Parts
Bendable
No
End 1 Flare Type
Inverted
End 2 Flare Type
Inverted
Features & Benefits - Bullet 1
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features & Benefits - Bullet 2
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 3
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 4
GM regularly updates production and service part designs to integrate new materials and technologies
Fitting Material
Steel
Fitting Type
Flare
Good Maintenance Practices - Section 1 - Bullet 1
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header
The following should be conducted by a qualified technician:
Height (in)
6.5
Inside Diameter
0.19<br />4.95
Length (in)
30.6
Line Diameter
0.27<br />6.87
Line Length
20.49<br />520.47
Line Material
Steel Rubber
Outer Spring
No
Outer Wear Guard
Yes
Outside Diameter
0.27<br />6.87
PADB ID 3031
0.47<br />12
PADB ID 951
0.47<br />12
Pre-Formed
Yes
Signs of Wear & Troubleshooting - Section 1 - Bullet 1
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 2
Vehicle pulls to the left or right when brakes are applied.
Weight (lb)
3.3
Width (in)
23.2
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Vehicle #1
Year
Make
Model
Body & Trim
Engine & Transmission
| Brand | Equivalent Part Numbers |
|---|---|
BrandEquivalent Part Numbers
GM
84974415
Shipping Policy
We use the following shipping parties:... Check out our Shipping Policy for more details.
Return Policy
30-Day Return Policy – Modern Wholesale Direct... Check out our Return Policy for more details.
Modern Wholesale Direct
Modern Wholesale Direct is your trusted online resource for Aftermarket parts for all your repair and maintenance needs. Shop the full catalog in our online store and keep your vehicle performing its best.